“3 Alarm Glaze” Tire & Trim Shine – 1 Gallon

Description

Deep black, high-gloss finish without the mess. “3 Alarm Glaze” is a water-based silicone emulsion dressing that delivers a rich, even shine on rubber, exterior plastic/trim, and interior vinyl/leather. It dries smooth in about 20 minutes when applied thin and evenly—so you get the look you want without sling. Leaves a clean, conditioned finish and helps defend against UV fading and cracking. Perfect for daily drivers, show vehicles, and emergency apparatus.

Why crews love it

• Water-based, low-mess formula: Easy application and easy cleanup from overspray.

• Sling-free when dry: Thin, even coats dry to the touch in ~20 minutes.

• Buildable gloss: One coat = satin; two coats = wet-look shine.

• Interior + exterior: Tires, exterior plastics/trim, engine bay plastics, vinyl & (non-suede) leather.

• Professional results fast: Rich black look that resists dust and fingerprints better than greasy solvent dressings.

 

What’s inside / Specs

• Type: Water-based silicone emulsion dressing

• Surfaces: Rubber tires, exterior plastic/trim, engine bay plastics, interior vinyl & non-suede leather

• Finish: Satin to high-gloss (layerable)

• Dry time: About 20 minutes (do not drive until dry)

• Protection: Helps resist UV fading & drying

 

How to use

Start clean and dry. If tires are brown or dusty, scrub with a dedicated tire cleaner and brush, rinse, and let fully dry before dressing.

Tires (satin → wet look)

1. Apply a small amount to a foam tire applicator.

2. Work a thin, even coat around the sidewall; avoid the tread.

3. Level high spots with the applicator for a uniform finish.

4. Allow ~20 minutes to dry. For more gloss, apply a second thin coat after the first sets.

5. Optional: For a satin look, lightly buff with a clean microfiber after drying.

Exterior plastic & trim

1. Put a small bead on an applicator.

2. Spread a thin, uniform film on clean, dry trim.

3. Wipe away any excess from paint or glass before it dries.

Interior vinyl & leather (low-sheen)

1. Apply sparingly to an applicator—do not spray directly on the surface.

2. Spread a light, even coat; then buff dry with a clean microfiber to reduce sheen.

3. Do not use on high-touch/safety surfaces (steering wheel, pedals, shifter, seats where slickness is unwanted).

 

Pro tips

• Thin coats look better and last longer—avoid flooding the surface.

• Always let the dressing fully dry before driving to prevent sling.

• For white-letter/white-wall tires, apply carefully and wipe edges for crisp lettering.

• Reapply after heavy rain, repeated washes, or harsh conditions.

 

Safety & storage

• Keep off tire treads, brake rotors, and pedals—slip hazard.

• Avoid glass and clear gauge lenses.

• Store sealed, upright, in a cool, dry place. Protect from freezing/heat.

• External automotive use only. Keep out of reach of children.

 

Frequently Asked Questions (FAQ)

Is it water-based or solvent-based? Water-based silicone emulsion—low mess, easy cleanup, and safe on most exterior/interior plastics when used as directed.

Will it sling? Not when used correctly. Apply thin, even coats and allow ~20 minutes to dry before driving.

Can I use it inside the cabin? Yes—on vinyl and non-suede leather. Apply sparingly to an applicator and buff dry. Avoid steering wheel, pedals, shifter, and high-touch areas.

How glossy is it? One thin coat gives a satin finish; a second thin coat builds to a high-gloss, wet-look.

Does it restore faded trim? It darkens and enriches appearance but is not a dye or permanent coating.

Is it safe on engine bay plastics? Yes—apply to clean, dry plastics and wipe any excess.